Menu
(Mon-Thurs 8am-5pm, Fri 8am-4pm)
Fast Delivery & Reliable Service
Specialists With 20+ Years Experience
Independent & Impartial Advice
Trusted by Customers, Rated 4.5/5
DG Steel Submersible Sewage Vortex Pump
DG Steel Submersible Sewage Vortex Pump
DG Steel Submersible Sewage Vortex Pump
DG Steel Submersible Sewage Vortex Pump
DG Steel Submersible Sewage Vortex Pump

DG Steel Submersible Sewage Vortex Pump

Product Code: PZDGSTEEL371
Product Code: PZDGSTEEL371
Stock Status: In Stock
Order within to get it by .
In Stock
Prefer to pay by phone?
Call 0333 050 3748 for quick and secure payment with our friendly team.
You may also need

DG Steel Submersible Sewage Vortex Pump Tough, Reliable Wastewater Handling for Domestic & Light Commercial Use

The DG Steel Submersible Vortex Pump is a robust and versatile sewage pump designed to handle dirty water, wastewater, and soft solids with ease. Its full stainless steel construction ensures excellent resistance to corrosion and wear, making it ideal for long-term use in harsh or damp environments.

Perfect for domestic sewage systems, septic tanks, agricultural runoff, and light commercial wastewater, this pump uses a vortex impeller design to efficiently transfer water containing solids without clogging.

The DG Steel models are a range of stainless steel submersible sewage pumps with set-back vortex impellers designed for pumping clean or slightly dirty water, containing soft solids up to 40mm particle size.  This makes the DG Steel submersible pump particularly suited to applications including:-

Cellars and basements.
Domestic and industrial.
Final effluent.
Nuisance water.
General de-watering projects.

A Great Choice for Wastewater, Septic Systems, and Effluent Handling

Common applications include:
Domestic sewage and wastewater pumping
Septic tank and cesspit emptying
Agricultural effluent and slurry transfer
Light commercial and workshop drainage
Industrial sump pits with soft solids and waste content


Fitted with a float switch as standard, the DG Steel submersible vortex pumps are automatic and ready to go, straight out of the box. 

Key Features & Benefits:

Vortex Impeller Technology Handles soft solids up to 40mm without blockage
Corrosion-Resistant Stainless Steel Built for longevity and reliability
Float Switch   Automatic as standard
Quiet, Submersible Design Efficient and discreet operation
Reliable Waste Handling Ideal for both clean and dirty water systems


The DG Steel 37 and 55 versions are supplied in 1phs, 230v only whereas the DG Steel 75 model is available in both 230v and 400v versions.

All of the DG Steel pumps in this section include 38mm threaded outlets, apart from the DG Steel 37 model which is supplied with a 32mm threaded outlet.

Why Buy the DG Steel Vortex Pump from Henry Pumps?

  • Built to handle sewage, slurry, and solids without clogging

  • Full stainless steel construction corrosion-resistant and durable

  • Automatic or manual operation to suit your system

  • Trusted performance for domestic and light commercial use

  • Expert advice, fast delivery, and dependable customer service


Capable of achieving flow rates of up to 375 litres per minute and 10 metre heads, these are tough contractors pumps supplied with efficiency motors for economical running.


Curve A = DG STEEL 37.   0.37kW motor.
Curve B = DG STEEL 55.   0.55kW motor.
Curve C = DG STEEL 75.   0.75kW motor.

When wastewater needs moving, the DG Steel Submersible Sewage Pump delivers strength, efficiency, and peace of mind. Available now from Henry Pumps the UKs specialists in water handling solutions.

product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review
  • Voltage:
    400v
  • Condition:
    New
  • Product Code:
    PZDGSTEEL371
  • Weight:
    6.6kg
Is this the right pump for you?

Suitable for

    • Basement and cellar sumps
    • Domestic wastewater chambers
    • Settled effluent transfer
    • Light commercial drainage

Not suitable for

    • Wipes and rag-heavy sewage
    • Thick sludge and heavy slurry
    • Aggressive or flammable liquids
    • Low-level puddle clearance

Frequently Asked Questions

What can the Zenit DG Steel pump handle?

The DG Steel is a submersible vortex pump for dirty water, sewage and compatible wastewater containing soft solids. Typical applications include domestic wastewater chambers, basement sumps and small commercial drainage systems.

The correct model depends on the size and nature of the solids, the required flow and the discharge route. The normal maximum liquid temperature is 40°C. Its stainless steel construction does not make it suitable for every chemical or industrial liquid.

Are all the versions on this page automatic?

Yes. The versions offered on this page are automatic, including the 400V three-phase DG Steel 75.

A float switch starts the pump as the water rises and stops it as the level falls. Zenit’s three-phase automatic arrangement uses a relay to support float-switch operation. Correct installation and free movement of the float are essential for reliable level control.

What discharge connection does the DG Steel use?

The DG Steel 37 has a vertical G 1¼-inch threaded outlet. The DG Steel 55 and 75 have vertical G 1½-inch threaded outlets. The G designation identifies a parallel BSP thread.

Choose fittings that match the pump connection and the hose or pipe being used. A hose tail must match both the outlet thread and the hose’s internal diameter.

Keep the discharge route suitably sized and avoid unnecessary reductions. Narrow fittings can restrict flow and create a smaller passage for solids than the pump itself provides.

Can I use it to empty a septic tank or handle farm effluent?

The DG Steel can be considered for suitable liquid effluent or sewage transfers where the solids, liquid properties and required pumping duty are within the selected model’s capabilities.

This does not establish suitability for emptying an entire septic tank, including its concentrated bottom sludge. Thick manure, straw-laden farm waste and heavy slurry also require a pump selected specifically for those materials.

For treatment-system applications, identify which chamber is being pumped and whether the contents are settled effluent, sewage or sludge before ordering.

What maintenance does the DG Steel need?

Keep the inlet, float and surrounding chamber clear of deposits and accumulated waste. Check that the float moves freely and that the pump starts and stops correctly as the water level changes.

Inspect the discharge route for restrictions and the cable for visible damage. Isolate the electrical supply before cleaning or handling the pump, and follow the manufacturer’s maintenance instructions for seals and other service items.

Repeated thermal trips, unusual noise or a noticeable loss of flow should be investigated. Routine cleaning and checks help preserve reliable automatic operation, particularly where wastewater leaves deposits in the chamber.

Henry Pumps Trade

In the trade? Unlock exclusive benefits

Support, pricing, and access tailored to pumping systems professionals.
30 day credit terms
Dedicated account manager

Buy with confidence

At Henry Pumps, we support residential, commercial, and industrial customers, from homeowners and landlords to contractors and facilities teams. Based in Derbyshire, we help solve flooding, drainage, and water management challenges across the UK. Every pump we supply is chosen for proven reliability and performance, backed by expert, straightforward advice you can trust. Whether you’re maintaining a property, managing a building, or dealing with an urgent issue, we’ll help you find the right solution.

Trusted Experts
We help you choose the right pump with honest, impartial advice every time.
Real Premises
Based in Chesterfield, UK, with a team that knows pumps inside out.
Next Working Day Delivery
Order before 4pm on in-stock items for next day delivery.
Rated 4.5/5 on Google
Based on real customer feedback.
Need help choosing a pump?
Get it right the first time. Our friendly team provides impartial, expert guidance to help you select the perfect pump.
Speak to our experts
Close
Checking availability…

Our pump experts are available Monday–Thursday 8am–5pm and Friday 8am–4pm.

Outside of these hours, please send us a message and we'll respond as soon as the team is back online. Orders can be placed through the website at any time.