You might also need...
The Henry Pumps RCM Male Plastic Elbow is a durable, cost-effective fitting designed to provide a 90° connection between flexible hose and rigid male BSP-threaded outlets. Featuring a hose tail on one end and a male BSP thread on the other, this elbow allows efficient hose routing in tight spaces, reducing the need for additional bends or adapters.
Available in a range of sizes including ¾″, 1″, 1¼″ and 1½″ threads with matching hose-tail diameters, this elbow is ideal for pump outlets, irrigation, general water handling and light industrial fluid transfer where neat routing and compact design are essential.
Key Features & Benefits
-
✅ 90° Elbow Design – enables neat hose routing and reduces kinking in confined spaces.
-
✅ Hose Tail x Male BSP Thread – combines a barbed hose tail for secure clamping with a threaded BSP connection.
-
✅ Lightweight Plastic Construction – corrosion-resistant and suitable for a wide variety of water and non-aggressive fluid systems.
-
✅ Multiple Size Options – available in ¾″, 1″, 1¼″, and 1½″ BSP threads to suit different hose diameters.
-
✅ Cost-Effective Solution – an affordable and practical choice for installations where metal fittings are unnecessary.
-
✅ Quick & Simple Installation – easy to fit using standard hose clips and BSP sealing methods.
Technical Specifications
| Parameter | Detail |
|---|---|
| Connection A | Male BSP Thread (¾″, 1″, 1¼″, 1½″ sizes) |
| Connection B | Hose Tail (barbed) matched to hose diameter |
| Elbow Angle | 90° |
| Material | Plastic (polypropylene or nylon type) |
| Size Range | ¾″ to 1½″ BSP thread with matching hose tail |
| Typical Applications | Water delivery, irrigation, pump connections, suction and discharge hoses |
| Pressure Rating | Suitable for low to medium pressure systems |
| Temperature Range | Typically up to 60 °C |
Always confirm thread and hose tail size match your system before installation.
Applications
The RCM Male Plastic Elbow is ideal for:
-
Pump discharge or suction connections where hose needs to exit at an angle
-
Irrigation and water transfer systems requiring compact hose routing
-
Temporary site setups or portable pump kits
-
General fluid-handling systems using flexible hoses and threaded outlets
-
Replacement and maintenance tasks in tight or awkward installations
Why Choose Henry Pumps?
At Henry Pumps, we go beyond supplying parts - we provide complete water-handling solutions. When you choose this RCM Male Plastic Elbow, you benefit from:
-
Expert technical guidance from our experienced team
-
Fast UK dispatch and dependable stock availability
-
Competitive trade pricing across our hose, fitting and pump accessory ranges
-
Products designed to integrate seamlessly with our pump and hose kits
Ordering Information & Options
When ordering, please confirm:
-
Male BSP thread size (¾″, 1″, 1¼″, or 1½″)
-
Hose tail diameter (to match your hose ID)
-
Preferred hose clip or coupling type
-
Fluid type, temperature and pressure suitability
-
Quantity and delivery requirements
Trade and bulk orders are welcome - ask us for volume pricing or next-day dispatch options.
Installation & Maintenance Tips
-
Push the hose fully onto the tail and secure firmly with a suitable hose clip.
-
Use PTFE tape or gasket material on BSP threads to ensure a watertight seal.
-
Avoid over-tightening plastic threads to prevent cracking.
-
Route hoses away from sharp edges or heat sources.
-
Inspect regularly for wear, leaks or UV damage in outdoor use.
-
For chemical or high-pressure systems, confirm material compatibility before use.
Contact Us
📞 Phone: 0333 050 3748
✉️ Email: sales@henrypumps.co.uk
For sizing support, system advice or a competitive quote — contact our friendly team today!
-
Condition:New
-
Product Code:060-064