Tsurumi LSC1.4S Premium Puddle Pump Kit – 2″ Outlet, 50m Layflat Hose & Camlock Couplings

The professional low-level puddle pump kit for draining flat surfaces down to 1mm.

The Tsurumi LSC1.4S Premium Puddle Pump Kit is a complete, ready-to-connect low-level drainage solution for contractors, flood response teams, facilities managers, maintenance engineers and property owners who need to remove standing water as thoroughly as possible.

Built around the trusted Tsurumi LSC1.4S puddle pump, this Premium kit is supplied as a 2″ / 50mm outlet version and includes two x 25 metre heavy-duty layflat hose assemblies, each pre-fitted with aluminium camlock couplings.

The pump is supplied with a 2″ Type A aluminium camlock fitted to the outlet, allowing the first hose to connect quickly and securely using its Type C camlock coupling. Each hose is fitted with a Type C camlock on one end and a Type E camlock on the other, allowing both 25m hose lengths to be connected together for a total discharge run of up to 50 metres.

This is a professional puddle pump kit designed for one key purpose: removing shallow nuisance water from flat surfaces, right down to approximately 1mm.

Why Choose the Tsurumi LSC1.4S Premium Puddle Pump Kit?

Most standard submersible drainage pumps are excellent for moving larger volumes of water, but they usually leave water behind once the level drops below the pump body or suction point.

The Tsurumi LSC1.4S is different.

It is a specialist puddle sucker pump designed for low-level water removal from flat surfaces. That makes it ideal for final flood clean-up, basements, garages, lift shafts, flat roofs, plant rooms, concrete slabs, service areas and construction sites where leaving several millimetres of water behind is not good enough.

The Premium version takes that proven low-level pumping performance and combines it with a contractor-ready hose and camlock package.

• Genuine Tsurumi LSC1.4S puddle pump
• Supplied as a 2″ / 50mm outlet version
• Pumps down to approximately 1mm
• Max flow up to 170 litres per minute
• Max head up to 11 metres
• Handles light sand, silt and suspended particles up to approx. 6mm
• Includes 2 x 25m heavy-duty layflat hose assemblies
• Hose assemblies supplied pre-fitted with aluminium camlock couplings
• Pump supplied with 2″ Type A camlock fitted to the outlet
• Allows one or both hose lengths to be used depending on the job
• Ideal for flood clean-up, final drainage and shallow water removal
• Available in 110V or 230V options

What’s Included?

Designed for Low-Level Pumping Down to 1mm

The key benefit of this kit is the ability to remove water from areas where a normal drainage pump would leave too much behind.

The LSC1.4S can be placed directly onto a suitable flat surface and used to remove shallow standing water down to approximately 1mm. This makes it a strong choice for areas where the aim is not just to reduce the flood level, but to get the surface as close to dry as possible before final clean-up.

Typical examples include:

• Water spread across a concrete floor
• Residual flood water in a basement or cellar
• Standing water on a flat roof
• Shallow water in a lift shaft
• Final clean-up after construction work
• Surface water in garages, workshops and plant rooms
• Water left behind after a larger drainage pump has done the bulk removal

This is the pump kit you choose when the job is not finished until the puddle is gone.

Premium Camlock Hose Setup

A puddle pump is often used in situations where speed and simplicity matter. Flooded rooms, wet sites, flat roofs and lift shafts are rarely ideal places to start assembling loose hose fittings.

That is why this Premium kit is supplied with the hose assemblies already made up.

The pump outlet is fitted with a 2″ Type A camlock, and the hoses are supplied with matching Type C and Type E aluminium camlock couplings. This gives a quick, secure and repeatable connection without needing to clamp loose fittings onto hose on site.

Use one 25m hose for shorter discharge runs, or connect both hose lengths together when you need to move water further away from the affected area.

50 Metres of 2″ Layflat Hose Included

The kit includes two x 25 metre lengths of 2″ heavy-duty layflat hose.

This gives the user far more flexibility than a single short hose length:

• Use one hose for simple pump-outs
• Connect both hoses for a 50m discharge route
• Move water away from basements, entrances, doorways or work areas
• Reach drains, gullies, soakaways or safe discharge points further away
• Keep the setup compact, tidy and easy to transport
• Reduce time spent searching for fittings, clips and loose hose tails

The 2″ hose arrangement is particularly useful where the pump is being used on site, in commercial environments or as part of a flood response kit.

Built Around the Proven Tsurumi LSC1.4S

The Tsurumi LSC1.4S is one of the best-known professional puddle pumps on the market. It is widely used by contractors, hire companies, utilities, flood response teams and maintenance teams because it solves a problem that ordinary submersible pumps often cannot: removing water from shallow, flat surfaces.

Its compact design, low-level suction capability and robust Tsurumi construction make it ideal for demanding environments. The LSC1.4S features a durable body, wear-resistant components, integrated check valve and a top discharge arrangement that helps with cooling during low-level operation.

The result is a professional-grade puddle pump kit that is easy to deploy and built for real-world use.

Ideal For

The Tsurumi LSC1.4S Premium Puddle Pump Kit is ideal for:

• Flood clean-up and emergency water removal
• Final water removal after larger pumps have reduced the water level
• Basements and cellars
• Garages and workshops
• Lift shafts and service pits
• Flat roofs and roof drainage
• Concrete slabs and hardstanding areas
• Construction site clean-up
• Utilities and maintenance teams
• Hire fleets and contractor use
• Plant rooms and commercial buildings
• Shallow nuisance water on flat surfaces
• Low-level drainage down to approximately 1mm

Not Suitable For

This pump kit is not designed for:

• Raw sewage or foul water containing toilet waste
• Heavy sludge, slurry or thick mud
• Large solids, stones, rags or fibrous material
• Saltwater or seawater applications
• Chemicals, detergents, fuels, diesel or oil
• Pumping from deep chambers where a standard drainage or sewage pump would be more suitable
• High-head applications beyond the pump’s performance range
• Continuous unattended automatic operation unless suitable controls are added
• Applications where the pump may be left to run dry for long periods

For sewage, saltwater, chemicals, heavy sludge or automatic pumping applications, please contact Henry Pumps for advice before ordering.

Good / Better / Best Positioning

The Premium kit is the best choice when you want the LSC1.4S puddle pump supplied as a proper quick-connect site kit rather than a pump and loose accessories.

Technical Specifications – Tsurumi LSC1.4S Premium Puddle Pump Kit

Please note: actual flow rate will depend on site conditions, vertical lift, hose length, discharge route and friction losses. Longer hose runs and higher lifts will reduce the actual delivered flow.

Key Benefits at a Glance

• Premium low-level puddle pump kit
• Pumps water down to approximately 1mm
• Supplied as a 2″ / 50mm outlet version
• 50 metres of 2″ layflat hose included
• Pre-assembled aluminium camlock hose couplings
• Type A camlock fitted to pump outlet
• Fast, simple hose connection
• Ideal for flat surfaces and final flood clean-up
• Compact and portable at approx. 12kg
• Handles light sand and silt in suspension
• Available in 110V and 230V options
• Built around trusted Tsurumi engineering

Need Help Choosing the Right Puddle Pump Kit?

The Tsurumi LSC1.4S Premium Puddle Pump Kit is the best choice if you need a professional low-level water removal kit with quick-connect hoses and up to 50 metres of discharge hose included.

Choose this kit when you need to remove shallow standing water from flat surfaces and want a complete, contractor-ready setup straight out of the box.

Need advice before ordering? Speak to the Henry Pumps team on 0333 050 3748 or email sales@henrypumps.co.uk.