Tsurumi LSC1.4S Puddle Sucking Pump

Tsurumi LSC1.4S Puddle Sucker Pump – Ultra-Low Level Drainage Down to 1mm

Say goodbye to standing water with the Tsurumi LSC1.4S – the ultimate puddle sucker pump, designed to pump water down to just 1mm. Lightweight, compact, and incredibly effective, this professional-grade submersible pump is ideal for flat surface water removal in both residential and industrial environments.

Manufactured by Tsurumi pumps, the LSC1.4S Puddle sucker flood pump is able to drain water down to as little as 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces.

Perfect for Final Clean-Ups & Surface Water Removal

The LSC1.4S is engineered for jobs that demand precision and dryness. No more mopping or wet-vac finishes—this pump leaves floors virtually dry.

Ideal for:
🏗️ Construction site final clean-ups
🧼 Flat roofs, basements & concrete slabs
🚪 Domestic flood recovery
🚿 Lift shafts, garages & tiled floors
🏢 Industrial maintenance & cleaning

Henry Pumps Ltd, in partnership with Tsurumi, have agreed to plant a tree for every Tsurumi pump sold in 2025!

This Tsurumi LSC pump incorporates a dual position outlet port (available in either 1 inch or 2 inch), to enable the user to position the outlet hose horizontally or vertically and avoid it kinking making this an extremely versatile choice for on site drainage.

Key Features & Benefits:

✅ Pumps Down to 1mm – Leaves surfaces virtually dry
✅ Compact & Lightweight – Only 12kg – easy to carry and move between jobs
✅ Integrated Check Valve – Prevents backflow during shutdown
✅ Side Discharge Design – Ideal for narrow spaces and low-level deployment
✅ Durable Tsurumi Engineering – Built for heavy-duty professional use

For durability, during robust handling, the Tsurumi LSC 1.4S puddle sucker flood pump has a pressed steel outer casing and a cast aluminium pump stand, to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability over time.

An additional feature of the Tsurumi LSC1.4S is an integral swing check valve to prevent back flow of water from the discharge hose. Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hard-wearing twin mechanical seal (inboard: silicon carbide-silicon carbide) which runs in a patented oil chamber that has an oil lifter to maintain seal lubrication during operation in any position.

This feature, combined with the water and air cooling route to the top outlet, allows the Tsurumi LSC1.4S puddle pump to operate for extended periods with little or no water.

Utilised extensively by hire companies, utilities and flood control companies.

Precision Pumping Where Others Can't Reach

The Tsurumi LSC1.4S delivers what most pumps can’t—effective low-level pumping right down to floor level. With no need for a sump, it can be placed directly on any flat surface. Perfect for quick response in emergency flood situations or for routine surface water maintenance.

Why Choose the Tsurumi LSC1.4S?

• ✔️ Pumps lower than most pumps on the market

• ✔️ Ideal for rapid deployment in emergencies or maintenance

• ✔️ Extremely portable and easy to handle

• ✔️ Rugged build for daily use on job sites

• ✔️ Trusted performance from a globally respected brand

Supplied with 10 metres of heavy duty rubber power cable.

The Tsurumi LSC1.4S is also available with sensor probe and control panel.  Please see related items below.

Offered with a 3 year guarantee, the Tsurumi LSC1.4S range of submersible puddle pumps are the ideal choice.

When you need to remove water completely, not just “most of it,” the Tsurumi LSC1.4S is the pump for the job. Precision. Performance. Peace of mind.

💧 Order now and dry it out properly – no mop required. 💧