Tsurumi LSC1.4S Puddle Sucking Pump c/w Switch & Panel

Manufactured by Tsurumi pumps, the LSC1.4S Puddle sucker flood pump is able to drain water down to as little as 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces.

Henry Pumps Ltd, in partnership with Tsurumi, have agreed to plant a tree for every Tsurumi pump sold in 2025!

It incorporates a dual position outlet port (available in either 1 inch or 2 inch), to enable the user to position the outlet hose horizontally or vertically and avoid it kinking making this an extremely versatile choice for on site drainage.

Extended Warranty available exclusively from Henry Pumps: Standard 3 year warranty, extendable to 5 years with servicing by an approved Henry Pumps engineer, ensuring longevity and peace of mind.

For durability, during robust handling, the Tsurumi LSC1.4S puddle sucker flood pump has a pressed steel outer casing and a cast aluminium pump stand, to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability over time.

An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose. Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hard-wearing twin mechanical seal (inboard: silicon carbide-silicon carbide) which runs in a patented oil chamber that has an oil lifter to maintain seal lubrication during operation in any position.

This feature, combined with the water and air cooling route to the top outlet, allows the Tsurumi LSC1.4S puddle pump to operate for extended periods with little or no water.

Utilised extensively by hire companies, utilities and flood control companies.

Supplied with 10 metres of heavy duty rubber power cable. 

The version on this page is supplied with our SwitcH20 which consists of 3 probes, in 304 stainless steel, that are set in an epoxy-resin filled holder and they represent on, off and common.  The SwitcH20 here is supplied with a Simplex control panel and 10 metres of low voltage, PVC power cable.  Full specification of the Simplex control panel can be viewed on our CONTROLS page or by clicking here.

Offered with a 3 year guarantee, the Tsurumi LSC1.4S range of submersible puddle pumps are the ideal choice.