Menu
(Mon-Thurs 8am-5pm, Fri 8am-4pm)
Fast Delivery & Reliable Service
Specialists With 20+ Years Experience
Independent & Impartial Advice
Trusted by Customers, Rated 4.5/5

Tsurumi TED Petrol Engine Trash Pump

Product Code: 18121009
Product Code: 18121009
Stock Status: In Stock
Order within to get it by .
In Stock
Prefer to pay by phone?
Call 0333 050 3748 for quick and secure payment with our friendly team.
You may also need

Tsurumi TED Petrol Engine Trash Pumps – 2, 3 & 4 Inch

Honda-Powered Trash Pumps for Dirty Water, Site Drainage and Flood Response

The Tsurumi TED petrol trash pump range is designed for demanding outdoor drainage and water-transfer duties involving sand, silt and suspended solids. These self-priming centrifugal pumps combine substantial water-moving capacity with accessible pump chambers for inspection and clearing debris.

Available in 2-inch, 3-inch and 4-inch sizes, the range uses Honda GX four-stroke petrol engines with recoil starting and Oil Alert engine protection. Petrol power allows the pumps to operate on construction sites, agricultural land and other locations without mains electricity.

Chromium iron impellers and volutes, silicon carbide mechanical seals and protective steel frames provide a robust construction for dirty-water pumping. Wing-nut inspection covers give access to the pump chamber, while an optional two-wheeled trolley helps with movement between working positions.

Honda GX Engines | Full-Trash Design | Hand-Access Inspection Covers | Oil Alert Protection | Optional Site Trolley

Key Features and Benefits

  • Full-trash pumping capability: Designed to move water containing sand, silt and suspended solids, with the permitted particle size depending on the model.

  • Honda four-stroke petrol engines: GX160, GX240 and GX340 engines provide independent power for outdoor pumping without an electrical supply.

  • Hand-access inspection covers: Wing-nut fastenings allow the cover to be released by hand for chamber inspection and debris removal.

  • Chromium iron impeller and volute: Wear-resistant pumping components suit drainage water containing abrasive particles such as sand and silt.

  • Silicon carbide mechanical seal: A hard-wearing seal material suited to the pump’s dirty-water applications.

  • Oil Alert engine protection: Helps protect the engine from damage caused by insufficient engine oil.

  • Protective frame and rubber feet: The tubular steel frame supports handling, while rubber feet help absorb engine vibration.

  • Optional site trolley: A two-wheeled trolley with solid rubber wheels assists with movement across suitable site surfaces.

Technical Specifications

Specification TED2-50HA TED2-80HA TED2-100HA
Pump type Self-priming centrifugal full-trash Self-priming centrifugal full-trash Self-priming centrifugal full-trash
Nominal inlet and outlet size 2 inch / 50 mm 3 inch / 75 mm 4 inch / 100 mm
Engine Honda GX160 Honda GX240 Honda GX340
Fuel and engine type Four-stroke petrol Four-stroke petrol Four-stroke petrol
Starting method Recoil pull start Recoil pull start Recoil pull start
Oil Alert engine protection Yes Yes Yes
Published maximum flow 800 litres/minute 1,300 litres/minute 2,000 litres/minute
Maximum flow in m³/hour 48 m³/hour 78 m³/hour 120 m³/hour
Published maximum total head 26 metres 30 metres 23 metres
Maximum recommended suction lift 6 metres 6 metres 6 metres
Published maximum solids passage 25 mm 35 mm 35 mm
Dry weight 33 kg 59 kg 69 kg
Dimensions, W × L × H 430 × 570 × 400 mm 485 × 670 × 610 mm 480 × 725 × 610 mm

Maximum flow and maximum head are separate performance limits. The pump will not deliver its maximum flow at its maximum head. Actual output depends on suction lift, delivery height, hose diameter, hose length, fittings and the condition of the pumped liquid.

Which Tsurumi TED Model Should You Choose?

TED2-50HA – 2-Inch Petrol Trash Pump

The TED2-50HA is the smallest and lightest model in the range. Its Honda GX160 engine and 2-inch connections make it a practical option for dirty-water drainage where its flow capacity and solids passage meet the application.

Consider this model for smaller excavations, localised floodwater removal and general site duties where equipment handling and hose size are important.

TED2-80HA – 3-Inch Petrol Trash Pump

The TED2-80HA combines greater flow capacity with the highest published maximum head in this UK-listed range. Powered by a Honda GX240 engine, it also offers a larger solids passage than the 2-inch model.

It is worth considering for construction drainage, agricultural pumping and larger outdoor water-removal jobs requiring a 3-inch hose arrangement.

TED2-100HA – 4-Inch Petrol Trash Pump

The TED2-100HA provides the highest published maximum flow in the range and uses a Honda GX340 engine. Its 4-inch connections suit higher-volume drainage and water-transfer duties within its operating limits.

Allow for the larger hoses, additional handling requirements and available working space when planning the installation.

For every model, the deciding factor is the flow available at your required operating head. Henry Pumps can help check the complete duty before you select a size.

Built for Water Containing Sand, Silt and Solids

The TED range is intended for dirty-water applications that need substantial solids-handling capability. Typical duties include excavation drainage, stormwater removal, agricultural drainage and suitable liquid-waste transfer.

The solids-passage figure describes the size of particles the pump can pass. It does not establish suitability for every type or concentration of debris. Long fibres, wipes, rope, thick sludge and concentrated slurry require particular attention during selection.

For water containing sand or silt, assess how much sediment is present and whether it remains suspended. Avoid burying the suction strainer in settled material, which can restrict the inlet and draw excessive sediment into the pump.

Accessible Pump Chamber for Inspection and Cleaning

Dirty-water pumping can introduce debris into the pump chamber. The TED’s wing-nut inspection cover provides hand access for checking the chamber and removing accumulated material.

This is useful where pumps are moved between jobs with different water conditions or need cleaning after a drainage task.

Before opening the cover, stop the engine, prevent accidental restarting and follow the operating instructions for allowing the pump to cool and releasing any trapped pressure. Refit the cover and seals correctly before priming and restarting.

What Is Included?

The pump assembly includes:

  • Tsurumi TED full-trash pump.

  • Honda GX four-stroke petrol engine with recoil starter and Oil Alert.

  • Tubular steel frame and rubber feet.

  • Hose couplings, sealing washers and hose clips.

  • Suction strainer.

The two-wheeled site trolley is an optional extra. Complete the installation with suitable suction and delivery hoses for the selected pump and intended duty.

Recommended Hoses and Accessories

The hose arrangement has a direct effect on priming, flow and practical site use.

  • Reinforced suction hose: Use suction-rated hose that resists collapse under vacuum and matches the pump’s inlet connection.

  • Delivery hose: Choose the diameter and pressure rating to suit the required flow, delivery route and operating pressure.

  • Compatible couplings and clamps: Secure all connections and ensure the suction side is airtight.

  • Optional site trolley: Useful when moving the pump regularly between suitable working positions.

  • Sediment-control equipment: Consider appropriate treatment where discharge water contains suspended silt.

Where practical, keep the suction hose short and direct. Account for friction losses when using long delivery hoses or multiple bends and fittings.

Priming and Operating Guidance

Position the pump on firm, level ground outdoors, with the engine and pump above the water. Keep exhaust gases away from occupied areas, doors, windows and air intakes.

Fill the pump casing with water before starting. Check the engine oil, fuel, hose connections and strainer in accordance with the operating instructions.

The maximum recommended suction lift is 6 metres, measured vertically from the water surface to the pump. A lower suction lift generally provides more favourable pumping conditions.

Keep the strainer submerged, monitor the water level and check that water continues to discharge. Stop the pump if it loses prime or starts drawing air.

Oil Alert monitors engine oil. It does not protect the pump from being run without water.

Independent Advice from Henry Pumps

Henry Pumps can help you select a petrol trash pump around the actual conditions of your job.

Tell us the type of water, the size and nature of the solids, the required flow, the vertical lift and the approximate hose distance. We can help compare models and choose suitable hoses, connections and accessories.

Call 0333 050 3748 or email sales@henrypumps.co.uk.

product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review
  • Condition:
    New
  • Product Code:
    18121009
  • Weight:
    33kg
Is this the right pump for you?

Suitable for

    • Construction-site dewatering with suspended solids.
    • Outdoor floodwater containing sand and silt.
    • Agricultural ditch and land drainage.
    • Dirty-water and suitable liquid-waste transfer.

Not suitable for

    • Rag-heavy sewage, thick sludge or concentrated slurry.
    • Solids exceeding the selected model’s passage size.
    • Seawater, chemicals, fuel or oil transfer.
    • Indoor or enclosed-space engine operation.

Frequently Asked Questions

What does “full-trash pump” mean?

A full-trash pump is designed to move water containing suspended solids and debris within its specified limits. The TED combines larger solids passages with an accessible chamber for inspection and clearing.

The term does not mean that every kind of rubbish can pass through the pump. Particle size, shape, concentration and the presence of fibres still need to be considered.

Can the Tsurumi TED pump water containing sand and silt?

Yes. The TED is designed for drainage water containing sand, silt and suspended solids. Its chromium iron impeller and volute are suited to these applications.

However, highly concentrated abrasive slurry requires a separate assessment. Keep the strainer clear of settled sediment and check the pump’s condition during demanding duties.

Can it pump sewage or liquid waste?

The TED can be considered for suitable sewage and liquid-waste applications where the fluid and its contents fall within the pump’s capability.

Assess solid size, fibre content, concentration and consistency before selection. Heavily rag-laden sewage, wipes, thick sludge or liquids requiring a cutting mechanism may need a different pump. Contact Henry Pumps with details of the waste before ordering.

Does the TED need priming before use?

Yes. Fill the pump casing with water before starting. The self-priming action then allows the pump to draw water through a correctly installed suction hose.

Air leaks, an empty casing, a blocked strainer or excessive suction lift can prevent successful priming.

Can the inspection cover be removed without tools?

The inspection cover is secured with wing nuts designed for hand release, allowing access to the pump chamber for routine inspection and debris removal.

This does not mean that all servicing is tool-free. Always stop and isolate the engine and follow the operating instructions before opening the chamber.

Can I use the TED inside a flooded building?

The petrol engine must operate outdoors. Do not run it inside a building, basement, tunnel or partially enclosed space because exhaust gases can accumulate.

An outdoor pump position with a suction hose reaching the water may be possible if the suction lift and hose arrangement are suitable. For many indoor drainage tasks, an appropriately selected electric submersible pump will be more practical.

Henry Pumps Trade

In the trade? Unlock exclusive benefits

Support, pricing, and access tailored to pumping systems professionals.
30 day credit terms
Dedicated account manager

Buy with confidence

At Henry Pumps, we support residential, commercial, and industrial customers, from homeowners and landlords to contractors and facilities teams. Based in Derbyshire, we help solve flooding, drainage, and water management challenges across the UK. Every pump we supply is chosen for proven reliability and performance, backed by expert, straightforward advice you can trust. Whether you’re maintaining a property, managing a building, or dealing with an urgent issue, we’ll help you find the right solution.

Trusted Experts
We help you choose the right pump with honest, impartial advice every time.
Real Premises
Based in Chesterfield, UK, with a team that knows pumps inside out.
Next Working Day Delivery
Order before 4pm on in-stock items for next day delivery.
Rated 4.5/5 on Google
Based on real customer feedback.
Need help choosing a pump?
Get it right the first time. Our friendly team provides impartial, expert guidance to help you select the perfect pump.
Speak to our experts
Close
Checking availability…

Our pump experts are available Monday–Thursday 8am–5pm and Friday 8am–4pm.

Outside of these hours, please send us a message and we'll respond as soon as the team is back online. Orders can be placed through the website at any time.