Menu
(Mon-Thurs 8am-5pm, Fri 8am-4pm)
Fast Delivery & Reliable Service
Specialists With 20+ Years Experience
Independent & Impartial Advice
Trusted by Customers, Rated 4.5/5

Yanmar Diesel Engine 2 & 3 Inch Pump

Product Code: 050-070
Product Code: 050-070
Stock Status: In Stock
Order within to get it by .
In Stock
Prefer to pay by phone?
Call 0333 050 3748 for quick and secure payment with our friendly team.

Yanmar-Powered DE50 & DE80 Diesel Water Pumps – 2-Inch & 3-Inch

Diesel Site Pumps for Construction, Utilities and Flood Response

The DE-50XD YR and DE-80XD YR combine self-priming centrifugal pumps with Yanmar L48V four-stroke diesel engines, providing portable water-transfer capability for construction sites, civil engineering, utilities and outdoor flood-response work.

Choose the 2-inch DE50 for general-purpose site drainage, or the 3-inch DE80 where greater water-transfer capacity is required. Both operate independently of mains electricity and use recoil pull starting, making them practical options for temporary installations and locations without an electrical supply.

A lightweight aluminium pump housing is paired with a cast iron impeller and volute for increased wear resistance. The engine and pumping assembly sit within a protective tubular steel frame with anti-vibration mounts.

Yanmar L48V Diesel Engines | Recoil Start | 2-Inch or 3-Inch | Cast Iron Pumping Components | Protective Carry Frames

Why Choose a Yanmar-Powered DE Pump?

  • Diesel-powered operation: A practical option for outdoor sites where diesel equipment is preferred and mains electricity is unavailable.
  • Two water-transfer capacities: Select the pump around the required flow, delivery head and hose arrangement.
  • Wear-resistant pumping components: Cast iron impellers and volutes are combined with carbon–ceramic mechanical seals.
  • Protected framed construction: The surrounding steel frame assists handling and helps protect the engine and pump during movement between jobs.

Model Comparison and Technical Specifications

Specification DE-50XD YR — DE50 DE-80XD YR — DE80
Pump type Self-priming centrifugal Self-priming centrifugal
Inlet connection 2-inch BSP male 3-inch BSP male
Outlet connection 2-inch BSP male 3-inch BSP male
Maximum published flow 600 litres/minute 1,000 litres/minute
Maximum flow in m³/hour 36m³/hour 60m³/hour
Maximum total head 25 metres 25 metres
Supplier-listed solids capacity 7mm 7mm
Engine Yanmar L48V Yanmar L48V
Engine type Air-cooled, four-stroke diesel Air-cooled, four-stroke diesel
Engine displacement 219cc 219cc
Starting method Recoil pull start Recoil pull start
Electric start Not fitted Not fitted
Operating control Manual Manual
Fuel Diesel Diesel
Fuel tank capacity 2.4 litres 2.4 litres
Oil Alert Not fitted to the listed configuration Not fitted to the listed configuration
Pump housing Aluminium Aluminium
Impeller and volute Cast iron Cast iron
Mechanical seal Carbon–ceramic Carbon–ceramic
Frame Tubular steel with anti-vibration mounts Tubular steel with anti-vibration mounts
Published dimensions, L × W × H 640 × 445 × 560mm 640 × 445 × 560mm
Published gross weight 47kg 51kg
Operating location Outdoors only Outdoors only

Maximum flow and maximum head are separate figures. Neither model delivers its maximum flow at 25 metres head.

The weights above are published gross weights, not verified dry pump weights. Plan handling and transport for the complete equipment being moved.

DE50 or DE80: Which Model Should You Choose?

DE50 — 2-Inch General-Purpose Site Drainage

The DE-50XD YR has 2-inch connections and a maximum published flow of 600 litres per minute.

It is the smaller option for drainage pits, collection areas and water-transfer jobs where its performance meets the required duty. A 2-inch hose arrangement may also be more convenient where the additional capacity of a larger pump is unnecessary.

DE80 — 3-Inch Higher-Volume Water Transfer

The DE-80XD YR increases maximum flow to 1,000 litres per minute, with 3-inch connections.

Consider it for larger water volumes and drainage duties where the DE50 cannot provide the required delivery. Its larger connections need appropriately sized hoses to make effective use of the additional capacity.

Both models have the same 25-metre maximum head and 7mm listed solids capacity. Moving to the DE80 increases flow capability; it does not increase the maximum pressure or the size of debris the pump can handle.

Site Water and Floodwater — Within the Pump’s Limits

The DE range is suited to clear and suitably dirty site water containing small particles within its 7mm limit.

Typical applications include construction drainage, utilities work, civil-engineering excavations and removing accumulated outdoor floodwater. The framed construction also suits equipment that needs to be transported between working areas.

However, these are not dedicated sewage, trash or slurry pumps. Thick mud, wipes, long fibres and concentrated abrasive mixtures require a different assessment.

The size, shape and concentration of material all matter. A 7mm solids rating does not mean that every liquid containing particles smaller than 7mm is suitable.

Keep the correct intake strainer fitted and clear of settled debris. For floodwater, check for sewage, fuel or chemical contamination before choosing the pump.

Understanding Flow, Head and Suction Lift

The DE80 does not deliver 1,000 litres per minute at 25 metres head. Available flow decreases as the head required by the installation increases.

The complete pumping duty includes the elevation difference between the source water surface and discharge point, resistance through the suction and delivery hoses, and any pressure needed at the outlet.

The 25-metre total-head figure is not a suction-lift rating. A surface-mounted pump cannot draw water from a source 25 metres below it simply because it has that delivery-head capability.

Position the pump as close to the source water level as safely practical. Keep the suction line short and airtight, and allow for the water level falling during pumping.

Henry Pumps can help assess the complete route before you select the pump and hoses.

Recoil-Start Diesel Power

Both listed versions use a Yanmar L48V diesel engine with recoil pull starting. They do not include an electric starter.

Use the specified diesel fuel and maintain the engine oil separately, following the instructions supplied with the engine. Do not use petrol or a two-stroke fuel mixture.

The listed DE configurations do not include Oil Alert. Check the engine-oil level before every use rather than relying on an automatic low-oil shutdown.

The 2.4-litre tank capacity is not a guaranteed runtime. Fuel consumption depends on the operating load, engine speed and conditions.

What’s Included?

The selected DE50 or DE80 pump is supplied with its protective frame, intake strainer, two hose couplings, three hose bands and an engine tool set.

Full suction and delivery hose lengths are separate unless expressly added to your order. This is a pump-only listing, not an assembled hose bundle.

A one-litre bottle of engine oil can be selected as an optional addition.

The bottle size is not the engine’s oil-fill capacity. Fill only to the specified level and complete the pre-start checks before operating.

Hose Selection and Priming

Use reinforced, suction-rated hose matching the pump’s inlet size. Ordinary layflat hose is unsuitable for suction because it can collapse under vacuum.

For delivery, use appropriately pressure-rated layflat or reinforced hose. Avoid unnecessary reductions, sharp bends and kinks, particularly over longer runs.

Fill the pump casing with clean water before starting. Self-priming describes the pump’s ability to clear air from a correctly prepared suction arrangement; it does not eliminate the initial water fill.

Keep the strainer submerged and supported clear of loose sediment. Check all suction connections for air leaks and stop the engine if the pump fails to deliver water.

Maintenance and Safe Handling

Check the engine oil, fuel system, intake strainer, hoses and connections before use. Follow Yanmar’s service instructions for the engine, including its oil and filter maintenance requirements.

Clean and drain the pumping section after use as instructed, particularly before storage where freezing could occur.

Support hoses so their weight does not strain the pump connections. Where delivery hoses cross vehicle routes, provide suitable protection: a vehicle compressing a hose can abruptly restrict flow and create damaging pressure surges.

Use appropriate handling equipment and assess the load before moving the pump. A protective frame does not, by itself, establish that the assembly is suitable for one-person lifting.

Important Notes

Never operate the diesel engine indoors or in an enclosed or partly enclosed space. Diesel exhaust contains carbon monoxide and other harmful pollutants. Opening doors or windows does not make indoor operation safe.

Keep the engine outdoors, away from doors, windows and ventilation openings. The pump unit must remain out of the water.

Do not run the pump dry or leave it operating against a closed discharge. These are manually controlled pumps, not automatic water-level or tap-demand systems.

Stop the engine and allow it to cool before refuelling or maintenance. Release system pressure before disconnecting hoses.

Diesel describes the engine’s fuel—not the liquid these pumps are intended to transfer. Do not use them for pumping diesel, petrol, solvents or incompatible chemicals.

Why Buy from Henry Pumps?

Get practical selection advice from an independent pump specialist.

Henry Pumps can help assess the water condition, required flow, suction arrangement and discharge distance, then match the selected pump with suitable hoses and fittings.

Our team can also assist with maintenance guidance and replacement-part enquiries.

Need Help or Advice?

Tell us what the water contains, how far below the pump it sits and where it needs to discharge.

Call 0333 050 3748 or email sales@henrypumps.co.uk for help selecting your Yanmar-powered diesel pump and accessories.

product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review
  • Product Code:
    050-070
  • Weight:
    47kg
Is this the right pump for you?

Suitable for

    • Construction and groundworks dewatering
    • Utilities and civil-engineering drainage
    • Outdoor floodwater removal within solids limits
    • Site-water transfer and tank emptying

Not suitable for

    • Indoor or enclosed-space operation
    • Sewage containing wipes and fibrous waste
    • Thick sludge and concentrated abrasive slurry
    • Fuel, solvent and aggressive-chemical transfer

Frequently Asked Questions

What is the difference between the DE50 and DE80?

The DE50 has 2-inch connections and a maximum published flow of 600 litres per minute. The DE80 has 3-inch connections and increases maximum flow to 1,000 litres per minute.

Both use a Yanmar L48V diesel engine and have the same 25-metre maximum head and 7mm listed solids capacity.

Choose according to the flow needed at your actual operating head, rather than assuming that the larger model also provides more pressure.

Are these pumps recoil-start or electric-start?

The versions listed here use recoil pull starting. Electric start is not fitted.

They operate using their own diesel engines and do not require mains electricity or a separate generator.

Follow the Yanmar starting procedure supplied with the equipment.

Can these pumps handle dirty water?

They can handle suitable site water containing small particles within the 7mm listed limit.

That does not make them suitable for raw sewage, wipes, dense sludge or heavily abrasive mixtures. Particle concentration and shape matter as well as size.

Keep the supplied strainer fitted and ask Henry Pumps to assess the application where contamination is substantial.

Does a self-priming diesel pump need water added before starting?

Yes. Fill the pump casing with clean water before starting the engine.

Self-priming does not make starting with an empty casing safe. The suction connections must also be airtight and the intake properly submerged.

Re-prime after draining the pump or losing prime. Stop and investigate if the engine runs but no water is delivered.

Can I use a diesel pump to drain a basement?

Potentially, where the water and suction arrangement are suitable—but the engine must remain safely outdoors.

Diesel power does not make indoor operation safe. Never run the engine inside a basement, garage, shed or enclosed building.

The suction hose must reach the water from a safe outdoor position, away from openings through which exhaust could enter.

Henry Pumps Trade

In the trade? Unlock exclusive benefits

Support, pricing, and access tailored to pumping systems professionals.
30 day credit terms
Dedicated account manager

Buy with confidence

At Henry Pumps, we support residential, commercial, and industrial customers, from homeowners and landlords to contractors and facilities teams. Based in Derbyshire, we help solve flooding, drainage, and water management challenges across the UK. Every pump we supply is chosen for proven reliability and performance, backed by expert, straightforward advice you can trust. Whether you’re maintaining a property, managing a building, or dealing with an urgent issue, we’ll help you find the right solution.

Trusted Experts
We help you choose the right pump with honest, impartial advice every time.
Real Premises
Based in Chesterfield, UK, with a team that knows pumps inside out.
Next Working Day Delivery
Order before 4pm on in-stock items for next day delivery.
Rated 4.5/5 on Google
Based on real customer feedback.
Need help choosing a pump?
Get it right the first time. Our friendly team provides impartial, expert guidance to help you select the perfect pump.
Speak to our experts
Close
Checking availability…

Our pump experts are available Monday–Thursday 8am–5pm and Friday 8am–4pm.

Outside of these hours, please send us a message and we'll respond as soon as the team is back online. Orders can be placed through the website at any time.